3300 Series Universal Testing Systems up to 50 kN
Replaced by the 3400 Series in 2020, the 3340 single column and 3360 dual column universal testing systems were produced from 2003-2020 and were designed to perform tensile, compression, flexure/bend, peel, tear, shear, and cyclic tests. These table model testing machines were available in force capacities that range from 0.02 N (2 gf) up to 50 kN.
- 200:1 force range (i.e. use the load cell to 0.5% of capacity with no loss of accuracy)
- Load accuracy of 0.5% of indicated load
- 500Hz data acquisition rate
- Full software control (cyclic capability optional)
- Compatible with Bluehill® Software / Instron Remote Technical Support (RTS)
- Automatic transducer recognition for load cells and extensometers
- Thousands of optional grips and fixtures
- Optional temperature chambers
- Extra height and width options available
- Full CE compliance
The 3340 and 3360 Series frames remain compatible with our extensive selection of accessories, including grips, fixtures, load cells, extensometers, environmental chambers, and many other frame accessories.
| Specifications | ||||
|---|---|---|---|---|
| Model | Capacity | Minimum Speed | Maximum Speed | Vertical Test Space |
| Single Column Table Models | ||||
| 3342 | 0.5 kN | 0.05 mm/min | 1000 mm/min | 651 mm |
| 3343 | 1 kN | 0.05 mm/min | 1000 mm/min | 1067 mm |
| 3344 | 2 kN | 0.05 mm/min | 1000 mm/min | 1067 mm |
| 3345 | 5 kN | 0.05 mm/min | 1000 mm/min | 1123 mm |
| Dual Column Table Models | ||||
| 3365 | 5 kN | 0.01 mm/min | 1000 mm/min | 1193 mm |
| 3366 | 10 kN | 0.005 mm/min | 500 mm/min | 1193 mm |
| 3367 | 30 kN | 0.005 mm/min | 500 mm/min | 1193 mm |
| 3369 | 50 kN | 0.005 mm/min | 500 mm/min | 1193 mm |
3340 Series Single Column Models
The 3340 Series single column tabletop testing systems perform tensile, compression, peel, and bend tests on products and materials such as medical devices, biomaterials, elastomers, plastics, film and textiles
- Products
- 11/22/2017
- 0.7 MB
3340 Single Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
- Manual
- 5/3/2016
- 0.5 MB
3340 Single Column Table Frames Operator Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
- Manual
- 5/3/2016
- 500.9 KB
3360 Series Dual Column Table Models
The 3360 Series dual column tabletop testing systems perform tensile, compression, and bend tests on products and materials such as elastomers, plastics, medical devices, rope, textiles, and automotive parts.
- Products
- 11/22/2017
- 341.3 KB
3360 Dual Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details
- Manual
- 5/3/2016
- 0.5 MB
3360 Dual Column Table Frames Operator Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
- Manual
- 5/3/2016
- 466.1 KB